The Hako Scrubmaster B70 is a powerful, battery-operated walk-behind scrubber dryer for demanding commercial and industrial environments. With disc or cylindrical brush systems, working widths from 60 to 85 cm and standard wheel-driven traction, it delivers efficient scrubbing and water recovery with less physical effort for the operator.
Talk to an expertChoose disc-brush working widths of 65, 75 or 85 cm, or the B70 CL WB with twin cylindrical brushes and an integrated debris hopper. The range delivers theoretical performance from 3,000 to 4,200 m²/h, depending on configuration.
Hako-AquaControl applies cleaning solution precisely according to travel speed, helping reduce water and detergent consumption. Optional Chemical on Demand adds cleaning agent only when required, while 72-litre solution and 74-litre recovery tanks support longer cleaning cycles.
Standard traction drive propels the B70 smoothly across large floors and gradients. A height-adjustable speed control, padded handlebar, intuitive controls and excellent forward visibility help reduce fatigue during extended cleaning shifts.
Power Source: Battery
Nominal Voltage: 24 V
Maximum Battery Capacity: 105 Ah (B70); 180 Ah (B70 CL)
Working Width: 65, 75 or 85 cm with disc brushes; 60 cm with cylindrical brushes
Squeegee Width: 95 or 110 cm, depending on configuration
Cleaning Performance: 3,000-4,200 m²/h, depending on configuration
Working Speed: Up to 5 km/h
Cleaning System: 2 disc brushes/pads or 2 cylindrical brushes
Solution Tank Capacity: 72 L
Recovery Tank Capacity: 74 L
Total Output: 2.26-2.28 kW, depending on configuration
Length with Squeegee: Approximately 153-171 cm, depending on configuration
Width: 59 cm without squeegee; 95 or 110 cm with squeegee
Height: 115 cm above handlebar
Noise at Operator’s Ear: Approximately 63 dB(A), with further reduction available in Silent mode
Operation: Wheel-driven traction
Application: Indoor hard floors
The Scrubmaster B70 suits facilities that need a robust walk-behind scrubber machine for broad floor areas and demanding daily cleaning. Large water tanks, wide brush decks and traction drive support efficient operation with fewer refill stops and less physical effort.
Disc-brush models provide intensive scrubbing across open floors. Where loose debris and wet cleaning must be handled together, the B70 CL WB uses twin cylindrical brushes and an integrated debris hopper to reduce the need for pre-sweeping. Hako-AntiBac® and low-noise CL configurations support healthcare, aged care, food production and other sensitive environments.
Hako Australia sells and supplies the Scrubmaster B70 and other walk-behind floor scrubber machines nationwide, supported by operator training, servicing and technical assistance.
Our team can assess your facility, arrange a free onsite demonstration and explain purchase, hire, rental and leasing options, supported by operator training, servicing and technical assistance.
Where can I buy the Scrubmaster B70 in Australia?
Hako Australia sells and supplies the Scrubmaster B70 walk-behind floor scrubber nationwide. Our team can assess your requirements, arrange a free onsite demonstration and recommend the most suitable configuration for your facility.
Can I hire, rent or lease a Scrubmaster B70?
Hako Australia offers purchase, hire, rental and leasing options across its commercial cleaning machine range, subject to availability and operational requirements. Contact our team to discuss the most suitable arrangement.
What size areas can the Scrubmaster B70 clean?
The B70 is designed for medium and large commercial, industrial and institutional areas. Depending on its brush configuration, theoretical performance ranges from 3,000 to 4,200 m²/h. Actual productivity varies with site conditions and the cleaning program.
Does the Scrubmaster B70 clean and dry in one pass?
Yes. Its brushes apply cleaning solution and scrub the floor, while the rear squeegee and suction system collect dirty water. This leaves the floor cleaner, dryer and ready for use sooner than conventional mopping.
Which Scrubmaster B70 brush systems are available?
Disc-brush versions are available with 65, 75 or 85 cm working widths. The B70 CL WB has a 60 cm working width, twin cylindrical brushes and an integrated hopper that collects coarse debris while scrubbing.
Is the Scrubmaster B70 self-propelled?
Yes. The Scrubmaster B70 uses wheel-driven traction to propel the machine, reducing operator effort and supporting smooth, consistent cleaning over large floors and suitable gradients.
What is the difference between the B70 and B70 CL?
The standard B70 has a 65 cm disc-brush deck and output up to 3,200 m²/h. B70 CL configurations offer larger battery capacity, additional disc-brush widths or a cylindrical-brush system, speed-dependent solution control and Hako-AntiBac® tank treatment as standard.
How does the Scrubmaster B70 reduce water and chemical use?
Hako-AquaControl regulates the cleaning solution for accurate, efficient application. Optional Chemical on Demand allows detergent to be added only when required, while lightly soiled floors can be cleaned without continuously dispensing chemicals.
